CONTEGA SOLIDO EXO-D
Full-surface adhesive window sealing tape for exterior use with an additional adhesive zone on the fleece side
- The joint is immediately windproof and resistant to driving rain as a result of full-surface adhesion
- Extremely strong adhesion on mineral subsurfaces too thanks to SOLID adhesive
- Can be plastered over
- Simple adhesion
- Easy to apply
The CONTEGA SOLIDO EXO-D joint adhesive tape, which is full-surface adhesive and can be plastered over, ensures windtight and diffusion-permeable exterior sealing of windows and doors to adjacent building components made of wood and mineral subsurfaces such as concrete and masonry.
The integrated adhesive zone on the fleece side allows for easy adhesion to windows and doors.
The stuck joint is immediately windproof and can be subjected to loading. The fleece can simply be plastered over in accordance with our application guide.
|Backing||PP backing fleece, PP copolymer special membrane|
|Adhesive||modified waterproof SOLID adhesive / special acrylate adhesive|
|Release film||one or two split silicone-coated PE sheet|
|sd-value||EN 1931||0.7 m||EN 1931|
|Vapor permeance||ASTM E 96||4.7 US perms||ASTM E 96|
|Exposure time||3 months|
|Water column||EN 20811||> 2 500 mm ; > 8' 2"||EN 20811|
|Resistance to driving rain||ift, MO-01/1:2007-01, Abs. 5||up to 600 Pa, surrounding||ift, MO-01/1:2007-01, Abs. 5|
|Can be plastered over||yes|
|Application temperature||above -10 °C ; 14 °F|
|Temperature resistance||permanent -40 °C to 90 °C ; -40 °F to 194 °F|
|Storage||cool and dry|
The bonds should not be subjected to tensile strain.
Press firmly to secure the adhesive tapes, taking care to ensure that there is sufficient resistance pressure behind them.
Driving rainproof and windtight seals can only be achieved if this connection tape is laid without folds or creases and are uninterrupted.
Before sticking, subsurfaces should be brushed off, wiped clean with a cloth or cleaned using compressed air.
Uneven mineral subsurfaces may need to be levelled with a smooth finish.
Bonding to frozen surfaces is not possible. There must be no water-repellent substances (e.g. grease or silicone) on materials to be bonded. Subsurfaces must be sufficiently dry and have sufficient load-bearing capacity.
Permanent adhesion is achieved on all pro clima exterior membranes and on other underlay/sarking and wall lining membranes (e.g. those made of PP and PET).
Adhesion can be carried out on planed and painted wood, hard plastics, hard wood-based panels (chipboard, OSB and plywood panels) and on mineral subsurfaces such as concrete and masonry.
The best results in terms of structural stability are achieved on high-quality subsurfaces.
It is your responsibility to check the suitability of the subsurface; adhesion tests are recommended in certain cases.
Pretreatment with TESCON PRIMER is recommended in the case of subsurfaces with insufficient load-bearing capacity.