Application gun for AEROSANA system foil cartridges
Advantages
- Work more quickly: application and spreading of the sealant in a single working step
- Precise application of sealant: setting 1 for a line of sealant to close joints, setting 2 to spray over and seal surfaces
- Allows the technician to work with one hand
- No brush required
- Pressure: up to 6.8 bar (100 psi)
Areas of application
For particularly quick and easy application of the AEROSANA VISCONN and AEROSANA VISCONN FIBRE sealants from 600 ml (20.3 US fl oz) foil cartridges onto smooth and rough mineral and non-mineral subsurfaces such as timber, wood fibreboards, OSB, stone, plaster, concrete etc.
For use with air compressors capable of up to 6.8 bar (100 psi), 300 l/min air flow.
Installation instructions
Video: Handling AEROFIXX
Video, eave refurbishment with AEROFIXX
Video, joints at double collar ties with AEROFIXX
Video, window joint with AEROFIXX
General conditions
The AEROFIXX device is connected to a compressor with a suction flow rate of >300 l/min. The pressure is set to 6 bar (87 psi). All AEROSANA VISCONN products in 600 ml (20.3 US fl oz) foil cartridges can be applied using the AEROFIXX device. You can easily switch between line application and spray application by turning the spray head.
AEROFIXX technical support videos
Here you will find tips, support and troubleshooting information on how to work with AEROFIXX.