Welding liquid in the SOLITEX WELDANO roof lining system

 

Advantages

  • Economical to apply
  • Reliable homogeneous bonds can quickly be subjected to loading
  • Customised welding liquid in the SOLITEX WELDANO roof lining system
 

Application

Welding liquid agent for waterproof adhesion of overlaps for roof lining membranes made of PU (e.g. SOLITEX WELDANO).
Also suitable for adhesion of accessories - such as SOLITEX WELDANO-S sealing strips - that are used to seal details.

  Material
Material Tetrahydrofuran (90 %), Cyclohexanone (10 %)
Attribute Value Norm
Colour transparent
Application temperature > 0 °C, optimally 18-20 °C ; 32 °F, optimally 64-68 °F
Storage 15 °C to 25 °C ; 60 °F to 77 °F, dry and well ventilated, only in the original container, keep away from heat and sources of ignition

General conditions

Shake the container or stir the contents before use. Around 200 - 250 metres (219-270 yd) of membrane length can be welded (weld joint width 30 mm; 1.2") using a litre of WELDANO TURGA. The working temperature must not be below 0 °C / 32 °F.

Use the 500 ml bottle with a brush for particularly quick and easy application.
Advantages: quick and easy application of the WELDANO TURGA solvent welding agent, allows the technician to work with one hand, no contamination of the solvent welding agent in the container, volume of 500 ml (16.9 US oz).

Substrate

Before WELDANO TURGA is applied, SOLITEX WELDANO should be wiped clean with a cloth.
There must be no water-repellent substances (e.g. grease or silicone) on the subsurface.